Product Category
Contact Us
Tel：+86-519-83995608
Fax：+86-519-88997608
E-mail：info@czbsth.com
Web：http://www.czbsth.com/en/
Add：No. 26 Vigorhood Road, Industrial Park of Xixiashu Town,Changzhou City, Jiangsu Province
Home
>> 2 blade 3 blade Special end milling cutter for aluminum alloy
prev
next
《prev next》
2 blade 3 blade Special end milling cutter for aluminum alloy
Description:
1、The following table is based on the side milling of the reference value, groove milling cutting conditions the following table feed rate of 70% for the benchmark. 2、Please use the high rigidity precision machine tool and toolholder. When the machine tool and workpiece installation less rigid, vibration and abnormal sound. At that time, table recommended speed and feed year-on-year decrease. 3、Cutting depth is smaller, speed and feed rate can be increased year by year.
- Product Details
WC=90 Co=10 HV30=1571 Bending=3750N/mm2m Hardness=91.8 Particle size=0.6ηm
2 blade
3 blade
carbide end mill bits sizes
| Brand name | Cutting Diameter | Cutting Length | Overall Length | Shank Diameter | Name of Flutes (Z) |
| Bostontool | 1 | 3 | 50 | 4 | 2/4 |
| Bostontool | 1.5 | 4.5 | 50 | 4 | 2/4 |
| Bostontool | 2 | 6 | 50 | 4 | 2/4 |
| Bostontool | 2.5 | 8 | 50 | 4 | 2/4 |
| Bostontool | 3 | 9 | 50 | 4 | 2/4 |
| Bostontool | 4 | 12 | 50 | 4 | 2/4 |
| Bostontool | 3 | 9 | 50 | 6 | 2/4 |
| Bostontool | 4 | 12 | 50 | 6 | 2/4 |
| Bostontool | 5 | 15 | 50 | 6 | 2/4 |
| Bostontool | 6 | 18 | 50 | 6 | 2/4 |
| Bostontool | 8 | 24 | 60 | 8 | 2/4 |
| Bostontool | 10 | 30 | 75 | 10 | 2/4 |
| Bostontool | 12 | 32 | 75 | 12 | 2/4 |
| Bostontool | 16 | 45 | 100 | 16 | 2/4 |
| Bostontool | 20 | 45 | 100 | 20 | 2/4 |
| Bostontool | 1 | 4 | 100 | 6 | 2/4 |
| Bostontool | 2 | 8 | 100 | 6 | 2/4 |
| Bostontool | 3 | 12 | 100 | 6 | 2/4 |
| Bostontool | 4 | 16 | 100 | 6 | 2/4 |
| Bostontool | 5 | 20 | 100 | 6 | 2/4 |
| Bostontool | 6 | 24 | 100 | 6 | 2/4 |
| Bostontool | 8 | 32 | 100 | 8 | 2/4 |
| Bostontool | 10 | 40 | 100 | 10 | 2/4 |
| Bostontool | 12 | 45 | 100 | 12 | 2/4 |
★Please pay special attention to:
1、The following table is based on the side milling of the reference value, groove milling cutting conditions the following table feed rate of 70% for the benchmark.
2、Please use the high rigidity precision machine tool and toolholder. When the machine tool and workpiece installation less rigid, vibration and abnormal sound. At that time, table recommended speed and feed year-on-year decrease.
3、Cutting depth is smaller, speed and feed rate can be increased year by year.
4、Please use water soluble cutting fluid.
5、Recommended side milling Climb milling machining.
6、Under the condition of non interference, the tool can be suspended as long as possible.
Cutting condition:
2 blade
| Processed material | Aluminium alloy | Silicon aluminum alloy Si≤10% | ||
| Diameter | Speed | Feed rate | Speed | Feed rate |
| (mm) | (min-1) | (mm/min) | (min-1) | (mm/min) |
| 1 | 40000 | 650 | 40000 | 500 |
| 2 | 40000 | 950 | 32000 | 750 |
| 3 | 26500 | 1500 | 21000 | 1100 |
| 4 | 20000 | 1600 | 16000 | 1250 |
| 5 | 16000 | 1500 | 13000 | 1100 |
| 6 | 13000 | 1250 | 10600 | 1000 |
| 8 | 10000 | 1400 | 8000 | 1100 |
| 10 | 8000 | 1600 | 6500 | 1250 |
| 12 | 6600 | 1650 | 5300 | 1300 |
| 14 | 5700 | 1700 | 4600 | 1350 |
| 16 | 5000 | 1700 | 4000 | 1350 |
| 18 | 4400 | 1700 | 3500 | 1350 |
| 20 | 4000 | 1700 | 3200 | 1350 |
★Please pay special attention to:
1、The following table is based on the side milling of the reference value, groove milling cutting conditions the following table feed rate of 70% for the benchmark.
2、Please use the high rigidity precision machine tool and toolholder. When the machine tool and workpiece installation less rigid, vibration and abnormal sound. At that time, the recommended speed and feed ratio decreased to the same.
3、Cutting depth is smaller, speed and feed rate can be increased year by year.
4、Please use water soluble cutting fluid.
5、Milling and milling.
6、Under the condition of non interference, the tool can be suspended as long as possible.
Cutting condition:
3 blade
| Processed material | Aluminium alloy | Silicon aluminum alloy Si≤10% | ||
| Diameter | Speed | Feed rate | Speed | Feed rate |
| (mm) | (min-1) | (mm/min) | (min-1) | (mm/min) |
| 1 | 40000 | 800 | 40000 | 600 |
| 2 | 40000 | 1200 | 32000 | 900 |
| 3 | 26500 | 1800 | 21000 | 1300 |
| 4 | 20000 | 2000 | 16000 | 1500 |
| 5 | 16000 | 1750 | 13000 | 1300 |
| 6 | 13000 | 1500 | 10600 | 1200 |
| 8 | 10000 | 1650 | 8000 | 1300 |
| 10 | 8000 | 1900 | 6500 | 1500 |
| 12 | 6600 | 1950 | 5300 | 1550 |
| 14 | 5700 | 2000 | 4600 | 1600 |
| 16 | 5000 | 2000 | 4000 | 1600 |
| 18 | 4400 | 2000 | 3500 | 1600 |
| 20 | 4000 | 2000 | 3200 | 1600 |
